Since its foundation, PS Marcom Services has written numerous press articles that have been successfully published by the customers themselves or with the support of PS Marcom Services. The following selection of examples shows some of the topics PS Marcom Services has covered in the past. Many articles were not only published in the mentioned magazines, but mostly several times.

You can also benefit from our many years of experience and contacts to intensify your public relations!

With a fully automated test system for the production of donuts, Fanuc, Vision On Line and Teledyne DALSA demonstrate how efficient processes in the food industry and others are achieved with robotics and vision systems.

Language: German

Customer: Teledyne Dalsa (www.teledynedalsa.com)

Published: December 7, 2023 in Polyscope 23/2023 (Switzerland)

Download pdf: Polyscope-12-2023-p38-39.pdf

Publisher´s website: www.polyscope.ch

The automotive industry is one of the pioneers when it comes to the use of innovative technologies in the production of the required parts and systems. Industrial machine vision systems based on artificial intelligence from Cognex are a guarantee for effective quality control in the production of electric vehicles.

Language: German

Customer: Cognex (www.cognex.com)

Published: October 5, 2023 in Elektronik Praxis 13/2023

Download pdf: Elektronik-Praxis-13-2023-S28-30.pdf

Publisher´s website: www.elektronikpraxis.de

The simultaneous detection of visible and SWIR light with a single line scan camera can improve the efficiency of industrial machine vision in many industries. This possibility is offered by the new Sweep+ series color line scan camera from JAI, which combines three CMOS line scan sensors with a resolution of 4,096 pixels each and an InGaAs line scan sensor with a resolution of 1,024 pixels via a prism.

Language: German

Customer: JAI (www.jai.com)

Published: September 25, 2023 in Konstruktion 10/2023

Download pdf: Konstruktion-10-2023-p17-19.pdf

Publisher´s website: www.ingenieur.de/fachmedien/konstruktion/

Stationary barcode readers and smart cameras from Zebra Technologies, combined with the range and expertise of Rauscher GmbH Bildverarbeitung, enable flexible solutions for logistics and intralogistics tasks in numerous industrial sectors.

Language: German

Customer: Rauscher GmbH Bildverarbeitung (www.rauscher.de)

Published: September 22, 2023 in Inspect 4/2023 (cover story)

Download pdf: Inspect-4-2023-Titelseite-S18-21.pdf

Publisher´s website: www.inspect-online.com

The innovative iPulse flash controllers from the South Korean manufacturer iCore are currently unrivaled in terms of their timing precision and achievable current levels. They are distributed in Europe by Rauscher GmbH Bildverarbeitung and raise the technical level of lighting control systems to a new level.

Language: German

Customer: Rauscher GmbH Bildverarbeitung (www.rauscher.de)

Published: September 14, 2023 in Invision 4/2023 (cover story)

Download pdf: inVISION-4-2023-TitelseiteS11-13.pdf

Publisher´s website: www.invision-news.de

Automated inspection stations from Ziemann & Urban, equipped with industrial cameras from SVS-Vistek and other image processing components, enable pipette tip manufacturers to inspect pipette tips with high precision and at the same time economically.

Language: German

Customer: SVS-Vistek (www.svs-vistek.com)

Published: June 30, 2023 in Meditronic Journal 3/ 2023

Download pdf: Meditronic-Journal-3-2023 SVS Vistek-S6-8.pdf

Publisher´s website: www.beam-verlag.de

Based on years of experience in electronics production and with machine vision components from Rauscher GmbH Bildverarbeitung for quality control, Heraeus has developed an innovative system for EMC shielding of 5G chips. As a provider of a complete solution consisting of machine, process and material, Heraeus is unique in this market.

Language: German

Customer: Rauscher GmbH Bildverarbeitung (www.rauscher.de)

Published: June 16, 2023 in Inspect 3/2023

Download pdf: Inspect-3-2023-S22-24.pdf

Publisher´s website: www.inspect-online.com

Vaccines against Covid and other diseases are provided in small vials, which must meet strict quality specifications for patient safety. In a plant for the production of plastic vials, several machine vision systems check that all criteria are met.

Language: German

Customer: Cognex (www.cognex.com)

Published: 24 April, 2023 in Medizin & Technik 2/ 2023

Download pdf: Medizin-und-Technik-2-2023-S28-29.pdf

Publisher´s webseite: www.medizin-und-technik.industrie.de

In an inspection facility for the electronics industry, a JAI Go-X Series CMOS camera ensures that thermal pads bonded to an aluminum heat sink are present and have been perfectly positioned at the intended location.

Language: German

Customer: JAI (www.jai.com)

Published: April 17, 2023 in Inspect 2/2023

Download pdf: Inspect-2-2023-JAI-Rimburgs.pdf

Publisher´s website: www.inspect-online.com

Two smart vision systems from the Cognex In-Sight series enable fully automated precision machining and inspection of high-quality automotive brake discs at Alber Metallbearbeitung in Meßkirch, Germany.

Language: German

Kunde: Cognex, (www.cognex.com)

Published: 2 November, 2022 in A&D – Automatisierung & Digitalisierung November 2022

Download pdf: AD-Nov22-Alber.pdf

Publisher´s website: www.publish-industry.net

Tuneable lenses are superior to conventional lenses in many respects. With a new product generation for NIR and green wavelengths with integrated optical feedback, Optotune is opening the doors to new applications, especially in the field of industrial lasers and medical technology.

Language: German

Customer: Optotune (www.optotune.com)

Published: 26 September, 2022 in Laser. Photonics. Professional 5/ 2022

Download pdf: Laser-Photonics-Professional-5-2022.pdf

Publisher´s website: www.felchner-medien.de

Millions of captured pixels help determine the exact position of patients within milliseconds, laying the foundation for the success of radiation therapy for cancer. A 3D area scan camera from Cognex, originally developed for industrial applications, enables the required high-precision position detection

Language: German

Customer: Cognex (www.cognex.com)

Published: September 22, 2022 in Medizin & Technik 5/ 2022

Download pdf: MedizinUndTechnik-5-2022-S20-21.pdf

Publisher´s website: www.medizin-und-technik.de

Speed is an undisputedly important factor in cars – and this already starts in the production of the vehicle´s smallest components. For the production of planetary gears for 9-speed automatic transmissions, an international car manufacturer relies on high-speed gear hobbing machines from Felsomat. Equipped with an integrated In-Sight 7010 image processing system from Cognex, Integrator i-mation ensures that only the right blanks are ever fed to the machine without any loss of time.

Language: German

Customer: Cognex, (www.cognex.de)

Published: September 21, 2022 in SMM Schweizer Maschinenmarkt 14/2022

Download pdf: SMM-14-2022-S32-33.pdf

Publisher´s website: www.maschinenmarkt.ch

Embedded vision is one of the most promising technologies for industrial machine vision. Further developments in hardware and software make the systems increasingly powerful and enable new applications. The use of artificial intelligence simplifies the use of the technology for users. However, the lack of standards still stands in the way of development. These are the core statements of high-ranking experts on the subject of embedded vision.

Language: German

Customer: Konradin Business GmbH, (www.konradin.de)

Published: September 6, 2022 in Quality Engineering 4/2022

Download pdf: QE-4-2022.pdf

Publisher´s website: https://quality-engineering.industrie.de/

Depalletizing any number of stacked pallets with different small load carrier box types, sizes and colors fully automatically with a robot without prior knowledge of the stacking scheme sounds like an almost impossible task. With a smart 3D machine vision system, the Pepperl+Fuchs company VMT has nevertheless realized it with the shortest cycle times.

Language: German

Customer: VMT Vision Machine Technic Bildverarbeitungssysteme (https://vmt-vision-technology.com)

Published: June 9, 2022 in A&D Automation Digitalisierung Juni 2022

Download pdf: AundD-6-2022-VMT.pdf

Publisher´s website: www.publish-industry.net

Cognex Corporation introduces the In-Sight 2800 vision system, an easy-to-implement solution for numerous factory automation use cases. The system combines innovative deep learning technologies with traditional rule-based vision tools to cover a wide range of inspection applications, from simple presence/absence detection of inspection objects to complex categorization and sorting problems.

Language: German

Customer: Cognex (www.cognex.com)

Published: April 29, 2022 in Industrielle Automation 3/2022

Download pdf: Industrielle-Automation-3-2022-Cognex-In-Sight-2800.pdf

Publisher´s website: www.industrielle-automation.net

3D vision is on the rise thanks to technological advances and lower costs, and is now used in a wide range of applications and industries, including semiconductors, electronics, electric vehicle batteries, automotive, food production and pharmaceutical packaging. Teledyne Dalsa has incorporated the current technical capabilities into its new Z-Trak2 series of 3D profile sensors. 

Language: German

Customer: Teledyne DALSA (www.teledyne.com)

Published: April 20, 2022 in InVision 2/2022

Download pdf: Invision-2-2022-TD-Z-Trak2.pdf

Publisher´s website: www.invision-news.de

Multifield is a new imaging technology that enables simultaneous capture of up to three images under different lighting conditions. Teledyne DALSA’s Linea HS multifield camera is the first line scan camera to provide this technology to enable more cost-effective and efficient visual inspection.

Language: German

Customer: Teledyne DALSA (www.teledyne.com)

Published: March 8, 2022 in InVision 1/2022

Download pdf: Invision-1-2022-Dalsa-Linea-Multifield.pdf

Publisher´s website: www.invision-news.de

SVS-Vistek’s shr661 high-resolution CMOS camera is now available with 10GigE Vision or CoaXPress-12 interfaces. Highlight of all shr661 cameras is the combination of high resolution and global shutter.

Language: German

Customer: SVS-Vistek GmbH (www.svs-vistek.com )

Published: March 8, 2022 in InVision 1/2022

Download pdf: InVision-1-2022-SVS-Vistek-shr661.pdf

Publisher´s website: www.invision-news.de

Machine vision illumination in plants for the pharmaceutical and food industries must meet particularly high requirements. ETW Wollmershäuser has developed patented, high-performance solutions for this area of application.

Language: German

Customer: ETW Wollmershäuser GmbH (www.etw-technik.de)

Published: March 8, 2022 in InVision 1/2022

Download pdf: Invision-1-2022-ETW.pdf

Publisher´s website: www.invision-news.de

The speed of logistics and manufacturing processes is constantly increasing in all industry segments. Stationary barcode readers enable smooth processes and thus optimize the profitability of many companies. With a new family of stationary barcode readers, logistics specialist Zebra Technologies Europe Limited offers users powerful options for effective material flow.

Language: German

Customer: Zebra Technologies Europe Limited www.zebra.com/de

Published: March 4, 2022 in Inspect 1/2022

Download pdf: Inspect-1-2022-Zebra.pdf

Publisher´s website: www.inspect-online.com

What advantages does Artificial Intelligence offer over conventional image processing – and how can we benefit from it without being an AI expert? What are the current and future applications of AI and embedded vision? This article looks at these questions in more detail.

Language: German

Customer: Teledyne Dalsa, (www.teledynedalsa.com)

Published: October 25, 2021 in Messtec Drives Automation 10/2021

Download pdf: Messtec-Drives-Automation-10-2021.pdf

Publisher´s website: www.wileyindustrynews.com/messtec-drives-automation

Zur Prüfung der mechanisch bearbeiteten Flächen von Motorblöcken aus Aluminium-Guss setzt Polytechnik Schmidt auf Bildverarbeitungssysteme von Teledyne DALSA.

Sprache: Deutsch

Kunde: Teledyne Dalsa, (www.teledynedalsa.com)

Veröffentlicht: 5. Oktober 2021 in Giesserei 10/2021

Download pdf: GIESSEREI-10_2021_Polytechnik-Schmidt.pdf

Webseite Verlag: www.giesserei.eu

Die Strelen Control Systems GmbH setzt eine Hyperspektralkamera des finnischen Herstellers Specim ein, um Nüsse und Schalenfrüchte zu prüfen, bevor diese in Lebensmitteln verarbeitet werden. Hochpräzisionsdüsen schießen fehlerhafte Anteile und Fremdkörper im Flug aus dem Prozess – da bleibt nur wenig Zeit für eine sichere Bildverarbeitung.

Sprache: Deutsch

Kunde: SPECIM, Spectral Imaging Ltd. (www.specim.fi)

Veröffentlicht: 15. September 2021 in LVT LEBENSMITTEL Industrie 9/2021

Download pdf: LVT-09-2021.pdf

Webseite Verlag: www.lvt-web.de

Within a few years, the company New Imaging Technologies (NIT) has become a leading manufacturer of SWIR cameras with its own sensor design. The potential of these cameras distributed via Rauscher is shown in this article from the trade journal InVision 4/2021.

Language: German

Customer: Rauscher GmbH (www.rauscher.de)

Published: September 8, 2021 in InVision 4/2021

Download pdf: InVision-4-2021-NIT-InGaAs-Kameras-Artikel.pdf

Publisher´s website: www.invision-news.de

The combination of an expensive lens with excellent values and a modern, high-resolution camera with a large CMOS sensor can lead to surprising and undesirable shading effects. With the necessary background knowledge and a suitable selection of camera and optics, this can be prevented.

Language: German

Customer: SVS-Vistek (www.svs-vistek.com)

Published: April 29, 2021 in Austromatisierung 3/2021

Download pdf: Austromatisierung-3-2021-S-76.pdf

Publisher´s website: www.austromatisierung.at

Kibele-PIMS has developed and implemented highly automated food packaging systems based on Teledyne DALSA vision systems for Unilever companies Knorr and Lipton.

Language: German

Customer: Teledyne DALSA (www.teledynedalsa.com)

Published: April 12, 2021 in f+h Fördertechnik, Materialfluss, Logistik 5/2021

Download pdf: FundH_05-2021.pdf

Publisher´s website: www.foerdern-und-heben.de

A leading German manufacturer of FFP2 protective masks based in Baden-Württemberg, Germany, is using INSPEKTO S70, the only autonomous vision system available on the market, for the quality inspection of mouth-nose protective masks.

Language: German

Customer: Inspekto (www.inspekto.com)

Published: March 17, 2021 in InVision 1/2021

Download pdf:
inVISION_1_2021_S64-65

Publisher´s website: www.invision-news.de

With the Industrial DashCam, IMAGO Technologies has developed an innovative solution for observing industrial processes, enabling effective condition monitoring to optimize processes in a wide range of industrial applications.

Language: German

Customer: IMAGO Technologies GmbH (www.imago-technologies.com )

Published: February 10, 2021 in SPS-Magazin 1/2021

Download pdf: SPS-Magazin-01-2021.pdf

Publisher´s website: www.sps-magazin.de

ifm’s Pallet Detection System uses Time-of-Flight technology
(ToF) and aims to increase productivity in logistics processes
and improve the effectiveness of Automated Guided Vehicles (AGVs).

Language: German

Customer: ifm (www.ifm.com/de/de)

Published: Ident yearbook 2021

Download pdf: ident_2021_Jahrbuch_ifm.pdf

Publisher´s website: www.ident.de

The Center for Device Development at the Fraunhofer Institute for Silicate Research ISC has developed a fully automated inspection system for bearing balls that is unique in the world to date. The basis of the sophisticated quality inspection system is machine vision from STEMMER IMAGING.

Language: English

Customer: Stemmer Imaging (www.stemmer-imaging.com)

Published: October 29, 2020 on www.stemmer-imaging.com

Matrox Imaging’s AltiZ 3D laser profile sensor uses two integrated cameras to deliver the highest precision and minimize scan gaps. With an optimally matched combination of hardware and software, AltiZ opens up new possibilities for 3D image processing. Rauscher Managing Director Raoul Kimmelmann then explains the prospects for 3D image processing in an interview.

Language: German

Customer: Rauscher (www.rauscher.de)

Published: October 28, 2020 in InVision 5/2020

Download pdf: Invision-5-2020-Gesamt

Publisher´s website: www.invision-news.de

Stihl uses Matrox Imaging artificial intelligence and Rauscher expertise to replace manual inspection of chainsaw components with an automated system, significantly improving quality assessment. Matrox Design Assistant X deep-learning-based classification tools play a significant role in the effective solution.

Language: German (Support in the preparation of the German article from the English original)

Customer: Rauscher (www.rauscher.de)

Published: October 28, 2020 in Inspect 5/2020

Download pdf: Inspect-2020-5-Cover+Titelstory.pdf

Publisher´s website: www.inspect-online.com

The measurement of powdered or lyophilized substances is a frequently encountered and challenging task in the pharmaceutical and biotech industries. The Chauvin Arnoux company Indatech has solved it in a simple way with its HypeReal system based on hyperspectral cameras from the Finnish manufacturer SPECIM.

Language: German

Customer: SPECIM, Spectral Imaging Ltd. (www.specim.fi)

Published: October 28, 2020 in InVision 5/2020

Download pdf: 024-Specim-Pharma-InVision-5-2020.pdf

Publisher´s website: www.invision-news.de

New EU guidelines for the recycling of fabrics and textiles have been in force since 2018. The goal of this project, which is very important for the environment, is to recycle all textiles worldwide from 2025. Hyperspectral imaging from the Finnish company SPECIM provides the technical prerequisites for successfully achieving this ambitious goal.

Language: German

Customer: SPECIM, Spectral Imaging Ltd. (www.specim.fi)

Published: September 30, 2020 in Schweizer Maschinenmarkt 20/2020

Download pdf: 023-Specim-TextileSorting-SMM-20-2020

Publisher´s website: www.smm.ch

The term “industrial machine vision” has established itself as a fixed combination in recent years and describes the essential field of application of the technology. Increasingly, however, the components and systems originally developed for the industrial sector are also being used in non-industrial applications. This article written for STEMMER IMAGING shows some examples.

Language: German

Customer: Stemmer Imaging (www.stemmer-imaging.com)

Published: July 23, 2020 at www.stemmer-imaging.com

Hyperspectral-based imaging is establishing itself in ever new industrial fields of application. This technology is particularly suitable for the food industry.

Language: English

Customer: Perception Park (www.perception-park.com)

Published: 20 July 2020 on Novus Light Technologies Today

Publisher´s website: www.novuslight.com

The term “machine vision” has established itself as a fixed combination in recent years and describes the main field of application of vision technology. However, the components and systems originally developed for the industrial sector are also increasingly being used in non-industrial applications as Teledyne DALSA and ChyronHego have proved with a vision based system for real-time sports analysis.

Language: English

Customer: Teledyne DALSA (www.teledyneimaging.com)

Published: 12 July 2020 on Teledyne DALSA´s Possibilty hub

Publisher´s website: https://possibility.teledyneimaging.com

Bildverarbeitung auf Basis von polarisiertem Licht bietet interessante Möglichkeiten, um verborgene Produkteigenschaften wie Spannungen in Kunststoffen oder Gläsern zu erkennen oder Fehlerinspektionen durch Folien hindurch zu realisieren. Welche Möglichkeiten sich daraus ergeben erläutert dieser Fachartikel, geschrieben für Stemmer Imaging.

Sprache: Deutsch

Kunde: Stemmer Imaging (www.stemmer-imaging.com)

Veröffentlicht: 8. Juni 2020 in Industrielle Automation 3/2020

Download pdf: 022-StemmerImaging-Polarisation-Industrielle Automation-03-2020

Webseite Verlag: www.industrielle-automation.net

Hyperspectral-based imaging is establishing itself in ever new industrial fields of application. With the help of hyperspectral imaging technology, spectroscopic analysis of objects can be carried out in order to determine organic or inorganic impurities – not only on the surface, but also partly inside the inspected materials.

Language: English

Customer: Perception Park (www.perception-park.com)

Published: 21 April 2020 in Inspect International 1/2020

Download pdf: 017-PerceptionPark-InspectInternational-1-2020

Publisher´s website: www.inspect-online.com

Wind turbines have to be switched off due to increasingly strict species protection regulations when protected bird species come close. With the help of artificial intelligence and components from Stemmer Imaging AG, a machine vision system from phil-vision GmbH averts the risk of the birds being hit by the wind turbines, thus minimizing expensive downtimes.

Language: German

Customers: Stemmer Imaging (www.stemmer-imaging.com), Perception Park (www.perception-park.com)

Published: April 16, 2020 in Polyscope 6/2020 (Schweiz)

Download pdf: 016-StemmerImaging-PhilVision-Polyscope-6-2020

Publisher´s website: www.polyscope.ch

Machine vision is an effective method for quality assurance in production and for rapid error detection. But it can also be useful in another areas: the Swiss company Artmyn has expanded the area of application to the art sector. With the help of 5D technology, visual works can be viewed in new ways and with unprecedented levels of detail. To do this, Artmyn uses vision systems based on Stemmer imaging components.

Language: German

Customer: Stemmer Imaging (www.stemmer-imaging.com),

Published: February 18, 2020 in Industrielle Automation 1/2020

Download pdf: 018-StemmerImaging-Artmyn-Industrielle Automation-01-2020

Publisher´s website: www.industrielle-automation.net

In order to make the production of components for forklift attachments profitable in the high-wage country of Germany, a high degree of automation is necessary. At Duwen Maschinenbau, the controls of the CNC milling machines from Mitsubishi Electric communicate directly with one handling robot each without using a higher-level master.

Language: German

Customer: Mitsubishi Electric (https://de3a.mitsubishielectric.com)

Published: December 10, 2019 im SPS-Magazin 12/2019 (Schweiz)

Download pdf: 015-MitsubishiElectric-Durwen-SPS-Magazin-12-2019

Publisher´s website: www.sps-magazin.de

With its innovative X-ray inspection systems, Minebea Intec enables customers around the world to safely and reliably inspect raw materials and packaged products as well as food and beverages. This article describes the use of the technology in the production of sweetener.

Language: German

Customer: Minebea Intec (www.minebea-intec.com)

Published: December 9, 2019 in LVT Lebensmittelindustrie 12/2019

Download pdf: 014-MinebeaIntec-XRayInspection-HCP-LVT-12-2019

Publisher´s website: www.lvt-web.de

Die Leistungsfähigkeit von Montagerobotern zu verbessern lautet das Ziel des Schweizer
Unternehmens Asyril. Es verwendet ausgereifte Bildverarbeitungssysteme, um Robotern
in der Produktion das Greifen von Schüttgut-Bauteilen zu erleichtern, und setzt dabei
auf eine innovative Idee sowie auf Industriekameras von SVS-Vistek.

Sprache: Deutsch

Kunde: SVS-Vistek (www.svs-vistek.de)

Veröffentlicht: 14. Juni 2019 in Inspect 3/2019

Download pdf: 013-SVSVistek-Asyril-Inspect-3-2019

Webseite Verlag: www.inspect-online.com

Bei der Produktion von Aluminiumschalen für Lebensmittel vertraut Hersteller Novelis auf die
Firma ISW (Industrielle Sensorsysteme Wichmann) und Bildverarbeitung von Stemmer Imaging, um die Qualität der Schalen während der Herstellung wirtschaftlich zu prüfen.

Sprache: Deutsch

Kunde: Stemmer Imaging (www.stemmer-imaging.com)

Veröffentlicht: 20. September 2019 in Computer & Automation 9/2019

Download pdf: 012-StemmerImaging-ISW-Novelis-ComputerundAutomation-9-2019

Webseite Verlag: www.computer-automation.de

Hochwertige Kunststoffteile sind heute in vielen Branchen unabdingbar, z.B. im Automobilbau, der Elektronikindustrie oder der Medizintechnik. Mit einem hohen Automatisierungsgrad stellt sich die Firma Rodinger Kunststoff-Technik (RKT) den Anforderungen an Qualität und Wirtschaftlichkeit bei der Produktion solcher Komponenten und nutzt dazu Steuerungstechnik, Visualisierung und Robotik von Mitsubishi Electric.

Sprache: Deutsch

Kunde: Mitsubishi Electric (https://de3a.mitsubishielectric.com)

Veröffentlicht: 11. September 2019 in SPS-Magazin 9/2019

Download pdf: 011-MitsubishiElectric-RKT-SPS-Magazin9-2019

Webseite Verlag: www.sps-magazin.de

Mit einer intelligenten Kombination aus einer 3D-Stereovisionkamera, einem leistungsfähigen Industrierechner und der KI-basierten robobrain.Vision-Softwarelösung lässt das Münchner Startup-Unternehmen robominds einen bisher unerfüllten Traum der Robotikbranche Realität werden: Roboter können beliebige Objekte greifen – ohne sie vorher zu kennen.

Sprache: Deutsch

Kunde: Robominds (www.robominds.de)

Veröffentlicht: 25. März 2019 in X-Technik Automation 1/2019 (Österreich)

Download pdf: 010-RobobrainVision-XTechnikAutomation-1-2019

Webseite Verlag: www.x-technik.com

Um an Berner Würstchen Kunstdarmreste, die zum Teil nicht größer als 1 mm² sind, sicher zu erkennen und verunreinigte Produkte auszusortieren, setzt der Wurstwarenhersteller Wolf eine Sortieranlage von BT-Anlagenbau ein. Schlüsselelemente dieses Systems sind Bildverarbeitungskomponenten von Stemmer Imaging sowie eine ausgeklügelte Bildverarbeitungssoftware und ein präzises Sortiersystem von BT-Anlagenbau, die eine Inspektion der Würstchen im Flug ermöglichen.

Sprache: Deutsch

Kunde: Stemmer Imaging (www.stemmer-imaging.com)

Veröffentlicht: 25. April 2019 in Inspect 2/2019

Download pdf: 021-StemmerImaging-Wolf-Inspect-2-2019

Webseite Verlag:  www.inspect-online.de

Bei der Herstellung von Lebensmitteln zählt die Sicherstellung der Hygiene in allen Prozessschritten zu den wichtigsten Herausforderungen. Für Minebea Intec hat das Thema Hygienic Design bereits seit Jahren oberste Priorität und zeigt sich auch bei der Vorstellung neuer Systeme des Unternehmens.

Sprache: Deutsch

Kunde: Minebea Intec (www.minebea-intec.com)

Veröffentlicht: 23. Januar 2019 in Molkerei-Industrie 4/2019

Download pdf: 009-MinebeaIntec-HygienicDesign-MolkereiIndustrie-4-2019

Webseite Verlag: www.moproweb.de

In der Karosseriefertigung von Audi Sportwagen der R8-Serie unterstützt ein Laserprojektionssystem von Z-Laser die Mitarbeiter bei der
manuellen Überprüfung der rund 1.500 Schweißnähte pro Karosserie.

Sprache: Deutsch

Kunde: Z-Laser (www.z-laser.com)

Veröffentlicht: 9. April 2018 in Inspect 2/2018

Download pdf: 008-ZLaser-Audi-Inspect-2-2018

Webseite Verlag: www.inspect-online.com

Embedded Vision zählt zu den innovativsten Themenfeldern der Bildverarbeitung. Dieser Artikel fasst die wichtigsten Ergebnisse einer Podiumsdiskussion während der Messe Embedded World 2018 zusammen.

Sprache: Deutsch

Kunde: Verband Deutscher Maschinen- und Anlagenbau (VDMA, https://ibv.vdma.org/)

Veröffentlicht: 13. Juni 2018 in Computer & Automation 6/2018

Download pdf: 007-VDMA-IBV-EmbeddedVision-ComputerundAutomation-6-2018

Webseite Verlag: www.computer-automation.de

Welche Möglichkeiten und Chancen die Technik dem Menschen bieten kann zeigt der VDMA mit seinem Online-Projekt Mensch Maschine Fortschritt auf. PS Marcom Services war wesentlich an der Entstehung des Moduls “Sehende Maschinen” beteiligt.

Sprache: Deutsch

Kunde: Verband Deutscher Maschinen- und Anlagenbau (VDMA, https://ibv.vdma.org/)

Veröffentlicht: 3. September 2018

Link: https://mensch-maschine-fortschritt.de/reportage/bildverarbeitung/

Um Etiketten oder andere bedruckte Bahnwaren bei Geschwindigkeiten von bis zu 350 m/min zu inspizieren und auftretende Fehler mit 100%iger Sicherheit zu erkennen, sind leistungsfähige Anlagen erforderlich. AB Graphic produziert solche Maschinen und setzt dabei auf Bildverarbeitung von Stemmer Imaging.

Sprache: Deutsch

Kunde: Stemmer Imaging (www.stemmer-imaging.com)

Veröffentlicht: 2. November 2018 in etz 11/2018

Download pdf: 006-StemmerImaging-ABGraphic-etz-11-2018

Webseite Verlag: www.etz.de

Die hyperspektrale Zeilenkamera Specim IQ erinnert in ihrer Form und mit ihrer kompakten Größe fast schon an Kameras aus dem Konsumerbereich, stellt jedoch ein komplettes System zur hyperspektralen Bildverarbeitung dar.

Sprache: Deutsch

Kunde: Specim (www.specim.fi)

Veröffentlicht: 16. April 2018 in InVision 2/2018

Download pdf: 005-SpecimIQ-InVision-2-2018

Webseite Verlag: www.invision-news.de

Für die Schweizer Fachzeitschrift Polyscope hat PS Marcom Services einen Trendartikel über aktuelle Entwicklungen in der Bildverarbeitung geschrieben und darin über neueste Entwicklungen in den Themenfeldern Embedded Vision, Deep Learning und weiteren Bereichen berichtet.

Sprache: Deutsch

Kunde: Polyscope (www.polyscope.ch)

Veröffentlicht: 25. Oktober 2018 in Polyscope 17/2018 (Schweiz)

Download pdf: 004-BVTrends-Polyscope-17-2018

Webseite Verlag: www.polyscope.ch

Die Otto Vision Technology GmbH entwickelt Prüfanlagen für Steckverbinder, die unter anderem in der Automobilindustrie eingesetzt werden. Da dort fehlerhafte Teile zu teuren Rückrufaktionen führen können, muss auf die Anlagen zu 100 Prozent Verlass sein. Dies gilt insbesondere für das Herzstück der Prüfgeräte: die Kameras der SVS-Vistek GmbH. Geschrieben von PC Marcom Services als Ghostwriter für SVS-Vistek.

Sprache: Deutsch

Kunde: SVS-Vistek (www.svs-vistek.de)

Veröffentlicht: 24. Januar 2018 in SMM Schweizer Maschinenmarkt 1-2/2018

Download pdf: 003-SVSVistek-Otto-SMM-1-2018

Webseite Verlag: www.maschinenmarkt.ch

Zur Vision 2018 hat Mitsubishi Electric neue Modelle seiner auf der Contact-Image-Sensor-Technologie (CIS) basierenden Line Scan Bars vorgestellt.
Mit zusätzlichen Längen sowie mit höheren Geschwindigkeiten und Auflösungen erschließen sie weitere Anwendungsfelder.

Sprache: Deutsch

Kunde: Mitsubishi Electric (https://de3a.mitsubishielectric.com)

Veröffentlicht: 12. November 2018 in Inspect 6/2018

Download pdf: 002-MitsubishiElectric-CIS-Update-Inspect-6-2018

Webseite Verlag: www.inspect-online.com

“Born on the racetrack. Built for the road.” With this slogan Audi is promoting the R8 series sports car. In the body production of this basic 610
hp car, a Z-Laser laser projection system assists the staff in the manual inspection of around 1,500 welds per body.

Language: Englisch

Customer: Z-Laser (www.z-laser.com)

Published: 12. October 2018 in Laser Technik Journal 4/2018

Download pdf: 001-ZLaser-Audi-LaserTechnikJournal-4-2018

Publisher´s website: www.photonicsviews.com

Laser modules from Z-Laser play a decisive role in the production of photovoltaic modules at Manz. They ensure flawless quality assurance and thus enable high efficiency of the finished systems.

Language: German

Customer: Z-Laser (www.z-laser.com)

Published: October 25, 2018 in Industrielle Automation 5/2018

Download pdf: 019-ZLaser-Manz-IndustrielleAutomation-5-2018

Publisher´s webseite: www.industrielle-automation.net

The proven Micro Four Thirds lens standard is primarily known from the consumer market. SVS-Vistek has developed a new camera series based on the Four-Thirds lens standard, demonstrating its full capabilities in industrial applications.

Language: German

Customer: SVS-Vistek (www.svs-vistek.de)

Published: October 25, 2018 in Industrielle Automation 5/2018

Download pdf: 020-SVSVistek-EXOTracer-Industrielle Automation-5-2018

Publisher´s webseite: www.industrielle-automation.net

Wollen Sie Ihre Pressearbeit ausbauen, haben damit bisher aber noch keine oder nur wenig Erfahrung? Fehlen Ihnen die Kontakte zu den Redakteuren der für Sie wichtigen Medien? PS Marcom Services unterstützt Sie zuverlässig und kompetent! Nehmen Sie einfach Kontakt zu uns auf, dann besprechen wir Ihre Vorstellungen und planen Ihren künftigen Presseauftritt!